We provide a coupon code depending on product. If you purchase more than 1 product or bigger package kindly contact to our customer support team to get a coupon code.
Here’s a simple, quick test to check whether your place is suitable for a signal booster.
The only thing you should do is check your outside signal strength on your mobile phone.
Here’s how to do it:
1. Find the highest point where you could put the outside antenna (generally on the roof).
2. Check how many signal bars you see on your mobile phone’s display while you are at that highest point
3. If you have 0 bars – contact us for help to make sure you’ll get a sufficiently powerful solution.
4. If you are suffering from poor outside signal strength of 1-2 bars, then our powerful booster kit will come to help you to get out of that troublesome situation and provide 5 full constant bars inside. (Of course, you can also use a standard kit with a yagi antenna, but the quantity of bars won’t go higher than 3-4 bars inside.)
5. If your outside signal strength is 3-4 bars, then we recommended you purchase a standard booster kit with a yagi antenna upgrade.
6. In case you have 4-5 bars outside, then no yagi upgrade is required as in this case the standard kit’s power will be sufficient enough to provide you with full 5 bars indoors.
7. Measure your property size to make sure the cable set included in a kit will be enough. We offer extra upgrades to help you have an easy set-up.
3. This booster is specially designed to work with a poor outdoor signal. We offer a Yagi antenna and more powerful booster included in the kit. The High Power Booster guarantees 5 constant bars inside your property.
4. You may still upgrade with more internal antennas and extra cable to be able get a signal in all the corners over your home, office or wherever you are using it.
Yes! The standard antenna can accept signal from within 170 degrees. If towers are located on the opposite side of your property than your antenna, you may need to upgrade your system by adding a second antenna so you can receive signal from all locations.
We sell high-quality products which are all capable of simultaneously supporting multiple devices. The limit for each booster mainly depends on its output power or ‘dBs’. We have provided a list of devices and their support limit converted to dBs below:
Estimations can also be made using this table:
|Coverage in square metres||Number of supported users|
|Up to 150 sq m||Up to 50 users|
|Up to 300 sq m||Up to 100 users|
|Up to 600 sq m||Up to 150 users|
|Up to 1500 sq m||Up to 200 users|
How to select the best location is described fully in The installation guide. However, if you still cannot find a good place, you can contact us through chat or by email and we will help you with the setup.
Signal boosters also known as Bi-directional amplifiers (BDA’s), repeaters or amplifiers work by capturing a signal outside the home, building, automobile, boat, warehouse, etc…,with an exterior antenna, bring it inside, amplify it, and rebroadcast it. For most of the products on this site, there are four main components: the Outside Antenna, the Amplifier (booster), the Inside Antenna, and the cabling to connect everything.
The Outside Antenna
The outside antenna can be omni-directional (can capture signal from all directions) or directional (works best when pointed in the direction of a cell tower).
The benefit to omni-directional antennas is that they are easy to install and pick up signals in a 360 degree horizontal plane, making them suitable to picking up signals from cell towers in different directions. You want to mount them as high as possible where the signal is strongest. A few disadvantages of omni-directional antennas:
1) Their gain is typically much lower than a directional antenna.
2) They are more prone to other RF interference.
3) They are more prone to pick up the signal from the indoor antenna, resulting in system oscillation (see more on this below).
4) Most omni-directional antennas are not wide band meaning that they will not work well for any frequencies outside of the 850 MHz or 1900 MHz bands.
The benefit to directional antennas (Yagi antennas) is that they typically provide more signal gain (power) than omni-directional antennas. They are also less prone to other RF interference. A disadvantage to the yagi antenna is that it will take more time to install because it must be pointed at your carrier’s cell tower. Also, if looking to boost the signal for multiple carriers and the towers are not in the same general direction this may not be the antenna for you or you will need to combine multiple yagi antennas on the roof. The ST-Yagi antenna is a good example of a popular wide band (698-2700 MHz) directional outdoor antenna which provides 8-10dB of gain and will work with all carriers and cell phone technologies in existence today. Yagi’s can also be band specific. Band specific yagi antennas provide even more gain than a wide band yagi but must be pointed exactly at your carrier’s tower as the beam width (pickup pattern) is much narrower than a wide band yagi.
Reasons to choose a Yagi (directional) Antenna:
We Recommend the Wide Band Yagi to the vast majority of our customers.
Reasons to choose an omni-directional antenna:
Every amplifier (or booster) must provide at least two ports, an input and an output. While higher end models will have more sophisticated circuitry, higher gains, and adjustable uplink and downlink gains, they all function pretty much the same. The signal coming in from the outside antenna is amplified and sent to the inside antenna. Every signal amplifier has a specification called Gain. Without getting too technical, gain is defined as the ratio of output to input. When specifying RF power, gain is measured in dB (decibels). dB numbers are derived from a fairly simple logarithmic function, however all you need to know is that every increase in 3 dB doubles the power. Ex. 1 watt into a 3 dB amplifier would come out as 2 watts. 1 watt into a 6 dB amplifier would come out as 4 watts. For more, please reference the following:
When searching for an amplifier for your particular application, please reference the following table:
|dB Gain||Applicable To||Antenna Separation|
|<20 dB||Automobile, Boat||4 ft. or direct connect.|
|30 dB||Automobile, Boat||5 ft. or direct connect.|
|40 – 45 dB||Large Auto, RV, Large Boat||6 ft. – 20 ft.|
|50 dB||1-2 Rooms in a Home||30 ft. – 50 ft.|
|55 dB||Small home up to 1,500 sq. ft.||50+ ft.|
|62 dB||Up to 5,000 sq. ft. Home, Office, Warehouse||60+ ft.|
|68 dB||Up to 7,000 sq. ft. Home, Office, Warehouse||75+ ft.|
|70 – 80 dB||Large Home / Commercial Application||100 + ft.|
Please keep in mind that this table represents general rules of thumb and the recommended applications and antenna separation distances may vary by product/manufacturer, outdoor signal strength, cable lengths and antennas. Antenna separation distances are to keep your amplifier from going to oscillation. In the audio world, this is analogous to getting a microphone too close to a speaker, thus producing feedback. If you choose directional indoor (wall mount panel) and outdoor (yagi) antennas or there is metal or multiple walls separating the antennas, often times these distances can be much shorter than the distances listed above. Also, increasing the vertical component of the separation as much as possible will reduce the required separation as well. These are straight line distances with both horizontal and vertical components, not distances based on the cable lengths.
The Inside Antenna
Inside antennas, just like outside antennas, come in different shapes and sizes and serve different purposes. Most of the other in-building amplifier products on this site have a separately mounted internal antenna. The most popular antenna for providing omni-directional internal coverage is the ceiling-mounted dome antenna. This type of antenna is a little more difficult to install than one that is directly attached to the amplifier, but is less obtrusive and typically provides more gain than a directly connected antenna. A dome antenna provides 360 degrees of horizontal coverage in a downward direction, making them ideal for covering a single floor with a more or less square layout. Inside antennas can be directional as well. If you are you looking to provide directional coverage for a large, open space or hallway, the wall-mounted panel antenna provides this. A panel antenna can also be installed in an attic (facing downward) for single floor coverage with tall ceilings. They may also be installed facing downward on lower ceilings for mutiple floor zoned coverage.
General Purchasing Recommendation
Reasons to choose a ceiling mounted dome antenna:
Reasons to choose a wall mounted panel antenna:
The cabling and connectors used to connect the outside antenna to the amplifier as well as the inside antenna to the amplifier play a crucial role in how your system will perform. Depending on the product, different types of cabling and connectors can be used. Your amplifier has to receive the highest quality signal possible in order to provide full indoor coverage. For this reason, it is recommended that runs using RG6 should be no more than 60 ft. For runs longer than 60′, RG11 should be used. For most of the other products on this site LMR-400 50 Ohm Coax is the standard. In comparison, while LMR-400 is more expensive and thicker, it only loses about 3-6 dB per 100 ft for cellular and PCS frequencies respectively. Based on this, LMR-400 can be run further than RG6 before there is a decrease in system performance. For all three-piece systems (outside antenna, amplifier, inside antenna) it is recommended the amplifier be installed as close to the external antenna as possible. Ex. If the external antenna is installed on a roof, it is recommended the amplifier be installed in the attic as opposed to the basement. The shorter the cable length between the external antenna and the amplifier, the better. Remember that there is no separation limit between the antennas and the amplifier, only between the antennas.
General Purchasing Recommendation
We will send the step by step instruction about installation. Just follow installation guide.
All orders will be shipped in 1 day with DHL or EMS shipping carrier up on receiving payment confirmation. We strive to provide the best customer service by providing also fast delivery.
Check our delivery terms to learn more about shipping
If for any reason you changed your mind about purchase fill free contact us for cancellation. Please make sure you do it within the same day of your purchase as merchandise bought by you will be shipped after 24 hours. We will refund full amount paid for purchase within 3 business days after confirming with our accounts department the refund / cancellation request. Depending the way you pay the money will be credited back to your account in 3 – 10 business days. More information about cancellation is available here.
We accept payments by credit card at the moment. Just use the easiest way for you to realize payment. The payment is 100 % secure and guaranteed. As the payment company we cooperate with ensures your purchase safety.
Our London UK office is doing administrative support and we assist our customers online. All products are located in our warehouse (check delivery terms). Due transportation and logistics management we ship directly to the customer from the warehouse.
The simplest way to test if your place is suitable for mobile booster installation is to check the signal bars in your phone.
The best signal is 5 bars however perfect coverage is possible in urban places. In suburban rural areas 4 bars is also not bad.
1st step to find out if mobile signal booster will work in your property or not is to check how many bars you do have.
If you have even 1 bar it means booster will help to increase to 5 bars using powerful external antennas
If you have 3 bars booster you won’t need so powerful antennas and standard kit will be enough to gain 5 bars.
Our Auckland office is doing administrative support and we assist our customers online. All products are located in our warehouse. Due transportation and logistics management we ship directly to the customer from the warehouse.
This is one of the most important part buyer shall be aware before purchasing signal booster. Depending on your home construction signal strengthen can be different. If you have several rooms and locate only 1 antenna it will deferentially be not enough to cover all house. We recommend to contact us and describe how many rooms you do have in order to choose the right quantity antennas to be able cover correspondingly.
We sell high quality product and all our products are supporting many users simultaneously. However keep in mind that it mainly depends on booster output power which is given with “dBm”. Below we give a list about how many users will support converted to dBm
10dBm – 50 users
17dBm – 100 users
24dBm – 150 users
27dBm – 200 users
You can find dBm information in technical specifications tab – Output power field
We accept payments both by credit card and PayPal system. Just use the easiest way for you to realize payment. The payment is 100 % secure and guaranteed. As the payment company we cooperate with ensures your purchase safety.
If for any reason you changed your mind about purchase fill free contact us for cancellation. Please make sure you do it within the same day of your purchase as merchandise bought by you will be delivered after 24 hours. We will refund full amount paid for purchase within 3 business days after confirming with our accounts department the refund / cancellation request. Depending the way you pay the money will be credited back to your account in 3 – 10 business days. More information about cancellation is available here.
All orders will be shipped in 1 day with DHL shipping carrier. We strive to provide the best customer service by providing also fast delivery.
Check our delivery terms to learn more about shipping
Installation guide will explain everything. If you still can not find contact us through chat phone or by email we will help you with set up.